← All products
AIRing
Every spindle decides for itself.
Individual spindle monitoring, with a roving stop that fires at the spindle.
Closes the chain · Ring frame → winding
Hardware shown on a floor visit.
The problem on your floor
Every "individual" spindle monitoring system on the market puts a sensor at each spindle and the intelligence in a board serving twenty-four of them. When that board dies, individual monitoring dies for the whole section. And a break travels to a machine station and back before anything stops — while drafted material keeps feeding the waste.
What it does
Outcomes, not method
- 01Break detection at every spinning position, independently
- 02A roving stop that acts at the spindle, not seconds later
- 03True per-spindle speed — the channel that makes slip, rogue and idle spindle analytics possible
- 04Zero configuration: a replacement is recognised without anyone setting it up
Why it is different
On every other system the decision is made a long way from the break, and a single failure takes a whole section blind. Here one stopped end is one stopped end.